Although we recommend installation to be performed by qualified professional floor installer, ALSTON brand Flooring can be professionally installed or do-it-your-self using the proper tools. Prior to installation, the Installer/Owner should perform a detailed product quality inspection. The Installer/Owner has the final inspection responsibility as to grade, color and factory finish of the products. If the flooring is not acceptable for any reason at the time of this final inspection, please do NOT install the flooring and contact the seller immediately. When installing, please be selective. Do NOT use materials that are not acceptable as to grade, manufacture or factory finish. ALSTON INC. will NOT be responsible for flooring with visual defects after it has been installed.
PLEASE READ OVER THE ENTIRE INSTALLATION INSTRUCTIONS AND WARRANTY INFORMATION BEFORE PROCEEDING WITH ACTUAL INSTALLATION.
•Minimum 72 hours are required
|Glue Down Methods
•Generally used for installation over concrete substrate
•Good planning is the key to a trouble free project
|Staple Down Method
•Used for installation over wood substrate.
•Please approve material BEFORE installation
| Floating Method
•Glued together and installed floated over substrate. Generally used application over Radiant Heat systems
|Job Site Preparation
•Must meet minimum requirements to have a successful installation
•Special instructions for installation over Radiant Heat Systems.